The John Deere X754 mower blade part number found is M154202. The blade set part number found is M168223. The blade measurement captured is center hole 1 in (25 mm). The deck uses 3 blades.
John Deere X754 Mower Blade Size and Part Numbers
| Mower blade part number | M154202 |
|---|---|
| Mower blade set part number | M168223 |
| Blade center hole size | 1 in (25 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, bagging, and Gator |
John Deere X754 Blade Notes
| Blade note | The John Deere X754 blade listing captured here shows single blade part number M154202, blade set part number M168223, and center hole 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere X754, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere X754 is high-lift, mulching, bagging, and Gator. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the John Deere X754, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
John Deere X754 Mower Blade FAQ
Can you modify a John Deere X754 blade center hole to fit?
Do not do that. The captured center-hole detail is 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Should you buy one John Deere X754 blade or a full set?
The single blade number captured is M154202, and the set number captured is M168223. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the John Deere X754?
The blade type captured is high-lift, mulching, bagging, and Gator. Use that against the captured fitment value M154202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
