Quick answer:
The John Deere X106 mower blade part number found is M154202. The blade measurement captured is center hole star / 1 in (25 mm). The deck uses 2 blades.
Blade part #M154202
Blade sizecenter hole star / 1 in (25 mm)
Blade count2 blades
John Deere X106 Mower Blade Size and Part Numbers
| Mower blade part number | M154202 |
|---|---|
| Blade center hole size | star / 1 in (25 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, and 3-in-1 |
John Deere X106 Blade Notes
| Blade note | The John Deere X106 blade listing captured here shows single blade part number M154202 and center hole star / 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere X106, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere X106 is high-lift, mulching, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Before ordering John Deere X106 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere X106 Mower Blade FAQ
Can you modify a John Deere X106 blade center hole to fit?
Do not do that. The captured center-hole detail is star / 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Which blade type should you use on the John Deere X106?
The blade type captured is high-lift, mulching, and 3-in-1. Use that against the captured fitment value M154202. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
