Quick answer:
The blade set part numbers found are GX22151 and GY20850. The blade measurement captured is center hole 1 in (25 mm).
Blade set part #GX22151 and GY20850
Blade sizecenter hole 1 in (25 mm)
John Deere SX95 Mower Blade Size and Part Numbers
| Mower blade set part number | GX22151 and GY20850 |
|---|---|
| Blade center hole size | 1 in (25 mm) |
| Blade type | high-lift, mulching, bagging, and 3-in-1 |
John Deere SX95 Blade Notes
| Blade note | The John Deere SX95 blade listing captured here shows blade set part numbers GX22151 and GY20850 and center hole 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Blade type note | The blade type captured for the John Deere SX95 is high-lift, mulching, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the John Deere SX95, confirm part number, deck size and blade count before buying |
John Deere SX95 Mower Blade FAQ
Why does the John Deere SX95 blade center hole matter?
The captured center-hole detail is 1 in (25 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
