The Kubota TG1860G deck belt part number found is K5201-71410. The deck belt size found is 106 in (2,692 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is K5201-71410. The drive belt size found is 106 in (2,692 mm) long by 0.38 in (10 mm) wide.
Deck belt part #K5201-71410
Deck belt sizelength 106 in (2,692 mm) and width 0.5 in (13 mm)
Drive belt part #K5201-71410
Drive belt sizelength 106 in (2,692 mm) and width 0.38 in (10 mm)
Kubota TG1860G Belt Size and Part Numbers
Mower deck belt part number
K5201-71410
Mower deck belt length
106 in (2,692 mm)
Mower deck belt width
0.5 in (13 mm)
Drive belt part number
K5201-71410
Drive belt length
106 in (2,692 mm)
Drive belt width
0.38 in (10 mm)
Belt Size Comparison Chart
Belt length comparison
This model
106 in
Average
110 in
Low
75 in
High
155 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Kubota TG1860G Belt Notes
Mower deck belt note
The Kubota TG1860G deck belt listing shows part number K5201-71410, length 106 in (2,692 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Kubota TG1860G drive or transmission belt listing shows part number K5201-71410, length 106 in (2,692 mm) and width 0.38 in (10 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note
For the Kubota TG1860G, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money
Kubota TG1860G Belt Size FAQ
Why can the correct Kubota TG1860G deck belt still slip?
The deck belt length found is 106 in (2,692 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Should you buy the Kubota TG1860G belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
