The Kubota T1570 deck belt part number found is K5112-71420. The drive belt part numbers found are K1122-26130, K5112-71420, and K5112-51310. The drive belt length found is 88 in (2,235 mm).
Deck belt part #K5112-71420
Drive belt part #K1122-26130, K5112-71420, and K5112-51310
Drive belt sizelength 88 in (2,235 mm)
Kubota T1570 Belt Size and Part Numbers
Mower deck belt part number
K5112-71420
Drive belt part number
K1122-26130, K5112-71420, and K5112-51310
Drive belt length
88 in (2,235 mm)
Belt Size Comparison Chart
Belt length comparison
This model
88 in
Average
75 in
Low
50 in
High
105 in
Kubota T1570 Belt Notes
Mower deck belt note
The Kubota T1570 deck belt part number captured here is K5112-71420. Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Kubota T1570 drive or transmission belt listing shows part numbers K1122-26130, K5112-71420, and K5112-51310 with length 88 in (2,235 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note
For the Kubota T1570, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money
Kubota T1570 Belt Size FAQ
What should you check when fitting a 88 in (2,235 mm) drive belt on the Kubota T1570?
The drive belt length found is 88 in (2,235 mm). This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Why are there multiple belt part numbers for the Kubota T1570?
The captured values separate the belt jobs: deck belt part number K5112-71420 and drive belt part numbers K1122-26130, K5112-71420, and K5112-51310. Treat each number as position-specific and confirm it against the parts diagram before ordering
What should you double-check with the Kubota T1570 deck belt part number?
The captured deck belt number is K5112-71420. Because the length and width are missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
What is the risk with the Kubota T1570 drive belt part numbers?
The captured drive belt numbers are K1122-26130, K5112-71420, and K5112-51310. If the width is missing, a cheap cross-reference can still be wrong even when it claims to replace the OEM belt
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
