The Kubota T1400 deck belt part number found is 77700-00465. The drive belt size found is 70 in (1,778 mm) long by 0.5 in (13 mm) wide.
Deck belt part #77700-00465
Drive belt sizelength 70 in (1,778 mm) and width 0.5 in (13 mm)
Deck size42 in deck
Kubota T1400 Belt Size and Part Numbers
Mower deck belt part number
77700-00465
Drive belt length
70 in (1,778 mm)
Drive belt width
0.5 in (13 mm)
Deck size
42 in deck
Belt Size Comparison Chart
Belt length comparison
This model
70 in
Average
75 in
Low
50 in
High
105 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Mower deck size comparison
This model
42 in
Average
38 in
Low
30 in
High
48 in
Kubota T1400 Belt Notes
Mower deck belt note
The Kubota T1400 deck belt part number captured here is 77700-00465. Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram
Drive belt note
The Kubota T1400 drive or transmission belt measurement captured here is length 70 in (1,778 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt
Deck size note
The captured mower deck size for the Kubota T1400 is 42 in deck. Deck size matters because the same model family can use different belts with different decks
Fitment note
For the Kubota T1400, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money
Kubota T1400 Belt Size FAQ
Why can the correct Kubota T1400 drive belt still not pull properly?
The drive belt length found is 70 in (1,778 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Can you replace the Kubota T1400 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
What is the fastest way to confirm the Kubota T1400 deck belt?
Start with the captured 42 in deck deck and the deck belt value 77700-00465. Then check the belt routing decal or parts diagram so you do not order a belt for the wrong deck
What should you double-check with the Kubota T1400 deck belt part number?
The captured deck belt number is 77700-00465. Because the length and width are missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
