The deck belt size found is 94.49 in (2,400 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 93 in (2,362 mm) long by 0.62 in (16 mm) wide.
Deck belt sizelength 94.49 in (2,400 mm) and width 0.5 in (13 mm)
Drive belt sizelength 93 in (2,362 mm) and width 0.62 in (16 mm)
Deck size48 in deck
Kubota G6200 Belt Size and Part Numbers
Mower deck belt length
94.49 in (2,400 mm)
Mower deck belt width
0.5 in (13 mm)
Drive belt length
93 in (2,362 mm)
Drive belt width
0.62 in (16 mm)
Deck size
48 in deck
Belt Size Comparison Chart
Belt length comparison
This model
94 in
Average
75 in
Low
50 in
High
105 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Mower deck size comparison
This model
48 in
Average
48 in
Low
38 in
High
60 in
Kubota G6200 Belt Notes
Mower deck belt note
The Kubota G6200 deck belt measurement captured here is length 94.49 in (2,400 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Kubota G6200 drive or transmission belt measurement captured here is length 93 in (2,362 mm) and width 0.62 in (16 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Deck size note
The Kubota G6200 deck size captured here is 48 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck belt setups
Fitment note
The blunt rule with the Kubota G6200: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast
Kubota G6200 Belt Size FAQ
Why can the correct Kubota G6200 deck belt still slip?
The deck belt length found is 94.49 in (2,400 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Should you buy the Kubota G6200 belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Which Kubota G6200 belt needs more careful length matching?
The deck belt is longer here: deck 94.49 in (2,400 mm) versus drive 93 in (2,362 mm), about 1.49 in (38 mm) different. Do not cross-match them just because both are mower belts
Should you order the Kubota G6200 belt by tractor model or deck size?
Use both. The deck size captured is 48 in deck, and the captured deck belt value is 94.49 in (2,400 mm). Model name alone is risky when multiple deck sizes or serial ranges exist
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
