The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.
Drive belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)
Cub Cadet GTX 2000 Belt Size and Part Numbers
Drive belt length
95 in (2,413 mm)
Drive belt width
0.5 in (13 mm)
Belt Size Comparison Chart
Belt length comparison
This model
95 in
Average
110 in
Low
75 in
High
155 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Cub Cadet GTX 2000 Belt Notes
Drive belt note
The Cub Cadet GTX 2000 drive or transmission belt measurement captured here is length 95 in (2,413 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt
Fitment note
Belts are cheap until you buy the wrong one twice. On the Cub Cadet GTX 2000, confirm belt route, old belt label and OEM part number before ordering
Cub Cadet GTX 2000 Belt Size FAQ
Why can the correct Cub Cadet GTX 2000 drive belt still not pull properly?
The drive belt length found is 95 in (2,413 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Can you replace the Cub Cadet GTX 2000 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
