The Cub Cadet 2155 deck belt part number found is 754-04240. The drive belt part number found is 754-04240. The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.
Cub Cadet 2155 Belt Size and Part Numbers
| Mower deck belt part number | 754-04240 |
|---|---|
| Drive belt part number | 754-04240 |
| Drive belt length | 95 in (2,413 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 2155 Belt Notes
| Mower deck belt note | The Cub Cadet 2155 deck belt part number captured here is 754-04240. Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Drive belt note | The Cub Cadet 2155 drive or transmission belt listing shows part number 754-04240, length 95 in (2,413 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the Cub Cadet 2155, confirm belt route, old belt label and OEM part number before ordering |
Cub Cadet 2155 Belt Size FAQ
Why can the correct Cub Cadet 2155 drive belt still not pull properly?
The drive belt length found is 95 in (2,413 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Can you replace the Cub Cadet 2155 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
