Cub Cadet 1512 Belt Size

Quick answer:

The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 83 in (2,108 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)
Drive belt sizelength 83 in (2,108 mm) and width 0.5 in (13 mm)

Cub Cadet 1512 Belt Size and Part Numbers

Mower deck belt length 95 in (2,413 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt length 83 in (2,108 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

95 in

Average

110 in

Low

75 in

High

155 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

Cub Cadet 1512 Belt Notes

Mower deck belt note The Cub Cadet 1512 deck belt measurement captured here is length 95 in (2,413 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note The Cub Cadet 1512 drive or transmission belt measurement captured here is length 83 in (2,108 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note Belts are cheap until you buy the wrong one twice. On the Cub Cadet 1512, confirm belt route, old belt label and OEM part number before ordering

Cub Cadet 1512 Belt Size FAQ

Is a close belt length good enough for the Cub Cadet 1512 deck?

The deck belt length found is 95 in (2,413 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Should you buy the Cub Cadet 1512 belt by length only?

No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Which Cub Cadet 1512 belt needs more careful length matching?

The deck belt is longer here: deck 95 in (2,413 mm) versus drive 83 in (2,108 mm), about 12 in (305 mm) different. Do not cross-match them just because both are mower belts

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.