The drive belt part number found is 754-04060. The drive belt size found is 83 in (2,108 mm) long by 0.5 in (13 mm) wide.
Drive belt part #754-04060
Drive belt sizelength 83 in (2,108 mm) and width 0.5 in (13 mm)
Cub Cadet 1340 Belt Size and Part Numbers
Drive belt part number
754-04060
Drive belt length
83 in (2,108 mm)
Drive belt width
0.5 in (13 mm)
Belt Size Comparison Chart
Belt length comparison
This model
83 in
Average
75 in
Low
50 in
High
105 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Cub Cadet 1340 Belt Notes
Drive belt note
The Cub Cadet 1340 drive or transmission belt listing shows part number 754-04060, length 83 in (2,108 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Fitment note
For the Cub Cadet 1340, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money
Cub Cadet 1340 Belt Size FAQ
Why can the correct Cub Cadet 1340 drive belt still not pull properly?
The drive belt length found is 83 in (2,108 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet 1340?
The captured drive belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
