Cub Cadet 1320 Belt Size

Quick answer:

The deck belt size found is 60.5 in (1,537 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 60.5 in (1,537 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 60.5 in (1,537 mm) and width 0.5 in (13 mm)
Drive belt sizelength 60.5 in (1,537 mm) and width 0.5 in (13 mm)

Cub Cadet 1320 Belt Size and Part Numbers

Mower deck belt length 60.5 in (1,537 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt length 60.5 in (1,537 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

60 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

Cub Cadet 1320 Belt Notes

Mower deck belt note The Cub Cadet 1320 deck belt measurement captured here is length 60.5 in (1,537 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note The Cub Cadet 1320 drive or transmission belt measurement captured here is length 60.5 in (1,537 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note The blunt rule with the Cub Cadet 1320: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast

Cub Cadet 1320 Belt Size FAQ

What should you watch when fitting a 60.5 in (1,537 mm) deck belt on the Cub Cadet 1320?

A 60.5 in (1,537 mm) deck belt leaves little room for sloppy routing. This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Before blaming the new belt, compare the belt path to the routing decal and make sure it sits on the correct side of each keeper

Should you buy the Cub Cadet 1320 belt by length only?

No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.