The drive belt part number found is 754-04317A. The drive belt size found is 81 in (2,057 mm) long by 0.38 in (10 mm) wide.
Cub Cadet 365 Belt Size and Part Numbers
| Drive belt part number | 754-04317A |
|---|---|
| Drive belt length | 81 in (2,057 mm) |
| Drive belt width | 0.38 in (10 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 365 Belt Notes
| Drive belt note | The Cub Cadet 365 drive or transmission belt listing shows part number 754-04317A, length 81 in (2,057 mm) and width 0.38 in (10 mm). Do not mix it up with the deck belt because the routing and job are different |
|---|---|
| Fitment note | The blunt rule with the Cub Cadet 365: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
Cub Cadet 365 Belt Size FAQ
Why can the correct Cub Cadet 365 drive belt still not pull properly?
The drive belt length found is 81 in (2,057 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Why does 0.38 in (10 mm) belt width matter on the Cub Cadet 365?
The captured drive belt width is 0.38 in (10 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
