The John Deere X167R deck belt part number found is M154202. The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is MIA10045. The drive belt size found is 62.9 in (1,598 mm) long by 0.5 in (13 mm) wide.
John Deere X167R Belt Size and Part Numbers
| Mower deck belt part number | M154202 |
|---|---|
| Mower deck belt length | 95 in (2,413 mm) |
| Mower deck belt width | 0.5 in (13 mm) |
| Drive belt part number | MIA10045 |
| Drive belt length | 62.9 in (1,598 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere X167R Belt Notes
| Mower deck belt note | The John Deere X167R deck belt listing shows part number M154202, length 95 in (2,413 mm) and width 0.5 in (13 mm). Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The John Deere X167R drive or transmission belt listing shows part number MIA10045, length 62.9 in (1,598 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the John Deere X167R, confirm belt route, old belt label and OEM part number before ordering |
John Deere X167R Belt Size FAQ
Why can the correct John Deere X167R deck belt still slip?
The deck belt length found is 95 in (2,413 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Why does 0.5 in (13 mm) belt width matter on the John Deere X167R?
The captured deck belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
How do you avoid mixing up the John Deere X167R deck and drive belts?
Use the belt position first: deck belt part number M154202 and drive belt part number MIA10045. A deck belt number does not automatically fit the drive system, even when an aftermarket listing makes the cross-reference look close
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
