The John Deere S130 deck belt part number found is M154202. The drive belt part number found is MIA11716. The drive belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide.
John Deere S130 Belt Size and Part Numbers
| Mower deck belt part number | M154202 |
|---|---|
| Drive belt part number | MIA11716 |
| Drive belt length | 95.5 in (2,426 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere S130 Belt Notes
| Mower deck belt note | The John Deere S130 deck belt part number captured here is M154202. Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Drive belt note | The John Deere S130 drive or transmission belt listing shows part number MIA11716, length 95.5 in (2,426 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt |
| Fitment note | For the John Deere S130, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money |
John Deere S130 Belt Size FAQ
What should you check when fitting a 95.5 in (2,426 mm) drive belt on the John Deere S130?
The drive belt length found is 95.5 in (2,426 mm). This is a longer mower belt run, so twist, idler alignment and the belt keeper positions matter. A belt can be the right length and still fail if it is routed wrong. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Can you replace the John Deere S130 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Why are there separate belt part numbers for the John Deere S130?
The captured values separate the belt jobs: deck belt part number M154202 and drive belt part number MIA11716. Treat each number as position-specific and confirm it against the parts diagram before ordering
What should you double-check with the John Deere S130 deck belt part number?
The captured deck belt number is M154202. Because the length and width are missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
