John Deere E110 Belt Size

Quick answer:

The John Deere E110 deck belt part number found is M154202. The deck belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide.

Deck belt part #M154202
Deck belt sizelength 95.5 in (2,426 mm) and width 0.5 in (13 mm)
Drive belt sizelength 95.5 in (2,426 mm) and width 0.5 in (13 mm)

John Deere E110 Belt Size and Part Numbers

Mower deck belt part number M154202
Mower deck belt length 95.5 in (2,426 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt length 95.5 in (2,426 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

96 in

Average

110 in

Low

75 in

High

155 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

John Deere E110 Belt Notes

Mower deck belt note The John Deere E110 deck belt listing shows part number M154202, length 95.5 in (2,426 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note The John Deere E110 drive or transmission belt measurement captured here is length 95.5 in (2,426 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note For the John Deere E110, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money

John Deere E110 Belt Size FAQ

Is a close belt length good enough for the John Deere E110 deck?

The deck belt length found is 95.5 in (2,426 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Should you buy the John Deere E110 belt by length only?

No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.