The Cub Cadet Z-Wing 48 coolant capacity is listed as 2.51 gal (9.5 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.
Coolant capacity2.51 gal (9.5 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix
Change intervalevery 2 years and every 500 hours
Cub Cadet Z-Wing 48 Coolant Capacity
Coolant capacity
2.51 gal (9.5 L)
Coolant type
ethylene glycol-based coolant
Antifreeze mix
50/50 coolant and water mix
Coolant change interval
every 2 years and every 500 hours
Engine horsepower
23 hp (17.2 kW)
Engine displacement
0.7 L (41.1 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
2.51 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
23 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.7 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Cub Cadet Z-Wing 48 Coolant and Engine Notes
Coolant capacity note
The Cub Cadet Z-Wing 48’s key coolant figure here is 2.51 gal (9.5 L) for coolant capacity. Use that before buying coolant or draining the system
Coolant type note
For the Cub Cadet Z-Wing 48, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant
Antifreeze mix note
The 50/50 coolant and water mix mix gives the Cub Cadet Z-Wing 48 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Coolant change interval note
The captured coolant change interval for the Cub Cadet Z-Wing 48 is every 2 years and every 500 hours. Old coolant can lose corrosion protection even if the tractor still runs cool
Engine context note
The Cub Cadet Z-Wing 48 engine data captured here is engine horsepower 23 hp (17.2 kW) and displacement 0.7 L (41.1 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note
The practical service move for the Cub Cadet Z-Wing 48: buy enough coolant for 2.51 gal (9.5 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Cub Cadet Z-Wing 48 Coolant Capacity FAQ
What is the cooling system capacity of the Cub Cadet Z-Wing 48?
The Cub Cadet Z-Wing 48 cooling system capacity is shown as 2.51 gal (9.5 L). That is the number to use before draining the system.
What coolant type should I use in the Cub Cadet Z-Wing 48?
Use ethylene glycol-based coolant. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Cub Cadet Z-Wing 48?
Not for normal long-term use. The Cub Cadet Z-Wing 48 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Cub Cadet Z-Wing 48?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Cub Cadet Z-Wing 48 is every 2 years and every 500 hours.
What engine specs affect Cub Cadet Z-Wing 48 coolant capacity?
The captured engine context is horsepower 23 hp (17.2 kW) and displacement 0.7 L (41.1 cu in). Engine size is one reason coolant capacity changes between tractors.
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.
