Cub Cadet RZT S42 Coolant Capacity

Quick answer:

The Cub Cadet RZT S42 coolant capacity is listed as 0.63 gal (2.4 L). It also lists coolant type ethylene glycol-based coolant and antifreeze mix 50/50 coolant and water mix.

Coolant capacity0.63 gal (2.4 L)
Coolant typeethylene glycol-based coolant
Antifreeze mix50/50 coolant and water mix

Cub Cadet RZT S42 Coolant Capacity

Cooling system capacity 0.63 gal (2.4 L)
Coolant type ethylene glycol-based coolant
Antifreeze mix 50/50 coolant and water mix
Engine horsepower 22 hp (16.4 kW)
Engine displacement 0.7 L (44.2 cu in)

Coolant Capacity Comparison Chart

Coolant capacity comparison

This model

0.63 gal

Average

1 gal

Low

0.5 gal

High

2 gal

Engine horsepower comparison

This model

22 hp

Average

18 hp

Low

10 hp

High

30 hp

Engine displacement comparison

This model

0.7 L

Average

0.9 L

Low

0.5 L

High

1.5 L

Cub Cadet RZT S42 Coolant and Engine Notes

Coolant capacity note The Cub Cadet RZT S42 coolant spec points to 0.63 gal (2.4 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available
Coolant type note Use the right coolant formula for the Cub Cadet RZT S42: ethylene glycol-based coolant. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits
Antifreeze mix note The 50/50 coolant and water mix mix gives the Cub Cadet RZT S42 coolant system a sensible balance of freeze protection, boil protection and corrosion protection
Engine context note The Cub Cadet RZT S42 engine data captured here is engine horsepower 22 hp (16.4 kW) and displacement 0.7 L (44.2 cu in). Bigger engines usually need more coolant and more careful refill bleeding
Refill note Coolant changes are simple but easy to do sloppily. On the Cub Cadet RZT S42, plan around 0.63 gal (2.4 L) and confirm the final level after air works out of the system

Cub Cadet RZT S42 Coolant Capacity FAQ

How much coolant does the Cub Cadet RZT S42 take?

The main coolant amount captured for the Cub Cadet RZT S42 is 0.63 gal (2.4 L). Buy a little extra so you can top up after the engine warms up and cools down.

Does coolant type matter on the Cub Cadet RZT S42?

Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Cub Cadet RZT S42, the captured coolant type is ethylene glycol-based coolant.

What antifreeze mix does the Cub Cadet RZT S42 use?

The captured antifreeze mix for the Cub Cadet RZT S42 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.

When should the Cub Cadet RZT S42 coolant be replaced?

Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.

What engine specs affect Cub Cadet RZT S42 coolant capacity?

The captured engine context is horsepower 22 hp (16.4 kW) and displacement 0.7 L (44.2 cu in). Engine size is one reason coolant capacity changes between tractors.

Official information note

Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official cubcadet.com website for official information before draining or refilling the cooling system.