The Cub Cadet RZT S42 deck belt part number found is 754-04212. The deck belt size found is 95 in (2,413 mm) long by 0.62 in (16 mm) wide. The drive belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide.
Cub Cadet RZT S42 Belt Size and Part Numbers
| Mower deck belt part number | 754-04212 |
|---|---|
| Mower deck belt length | 95 in (2,413 mm) |
| Mower deck belt width | 0.62 in (16 mm) |
| Drive belt length | 95.5 in (2,426 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet RZT S42 Belt Notes
| Mower deck belt note | The Cub Cadet RZT S42 deck belt listing shows part number 754-04212, length 95 in (2,413 mm) and width 0.62 in (16 mm). Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The Cub Cadet RZT S42 drive or transmission belt measurement captured here is length 95.5 in (2,426 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the Cub Cadet RZT S42, confirm belt route, old belt label and OEM part number before ordering |
Cub Cadet RZT S42 Belt Size FAQ
Why can the correct Cub Cadet RZT S42 deck belt still slip?
The deck belt length found is 95 in (2,413 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Why does 0.62 in (16 mm) belt width matter on the Cub Cadet RZT S42?
The captured deck belt width is 0.62 in (16 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
