The Kubota TG1860G coolant capacity is listed as 1.66 gal (6.3 L). It also lists antifreeze mix 50/50 coolant and water mix.
Coolant capacity1.66 gal (6.3 L)
Antifreeze mix50/50 coolant and water mix
Kubota TG1860G Coolant Capacity
Cooling system capacity
1.66 gal (6.3 L)
Radiator capacity
1.66 gal (6.3 L)
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
18 hp (13.4 kW)
Engine displacement
0.6 L (35.7 cu in)
Coolant Capacity Comparison Chart
Coolant capacity comparison
This model
1.66 gal
Average
2 gal
Low
1 gal
High
4 gal
Engine horsepower comparison
This model
18 hp
Average
18 hp
Low
10 hp
High
30 hp
Engine displacement comparison
This model
0.6 L
Average
0.9 L
Low
0.5 L
High
1.5 L
Kubota TG1860G Coolant and Engine Notes
Coolant capacity note
The headline cooling-system number for the Kubota TG1860G is 1.66 gal (6.3 L). Buy enough coolant before opening the drain plug
Radiator capacity note
The Kubota TG1860G radiator figure is 1.66 gal (6.3 L). Treat it as radiator context, not always the complete refill amount
Antifreeze mix note
The Kubota TG1860G antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control
Engine context note
For the Kubota TG1860G, the supporting engine specs are engine horsepower 18 hp (13.4 kW) and displacement 0.6 L (35.7 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note
The practical service move for the Kubota TG1860G: buy enough coolant for 1.66 gal (6.3 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling
Kubota TG1860G Coolant Capacity FAQ
What is the Kubota TG1860G coolant capacity?
The Kubota TG1860G coolant capacity is listed as 1.66 gal (6.3 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota TG1860G?
No. Use the coolant type specified in the manual or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota TG1860G?
Premixed coolant can be fine if it matches the coolant type specified in the manual and the required mix. The captured mix for the Kubota TG1860G is 50/50 coolant and water mix.
How often should I change coolant in the Kubota TG1860G?
The captured coolant change interval for the Kubota TG1860G is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota TG1860G coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota TG1860G, the supporting engine data is horsepower 18 hp (13.4 kW) and displacement 0.6 L (35.7 cu in).
Official information note
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
