The Kubota ME8200 coolant capacity is listed as 2.38 gal (9 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the ME8200 tractor to protect against freezing and overheating.
Kubota ME8200 Coolant Capacity
| Coolant capacity | 2.38 gal (9 L) |
|---|---|
| Radiator capacity | 2.38 gal (9 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the ME8200 tractor to protect against freezing and overheating |
| Engine model | V3300-TE |
| Engine horsepower | 86.7 hp (64.7 kW) |
| Engine displacement | 3.3 L (202 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota ME8200 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota ME8200 is 2.38 gal (9 L). Buy enough coolant before opening the drain plug |
|---|---|
| Radiator capacity note | Radiator capacity is listed as 2.38 gal (9 L). The full cooling system can be higher because coolant also sits in the engine and hoses |
| Coolant type note | The captured coolant type for the Kubota ME8200 is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | The Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the ME8200 tractor to protect against freezing and overheating mix gives the Kubota ME8200 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Engine context note | The Kubota ME8200 engine data captured here is engine model V3300-TE, engine horsepower 86.7 hp (64.7 kW), and displacement 3.3 L (202 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | For a coolant change on the Kubota ME8200, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota ME8200 Coolant Capacity FAQ
How much coolant does the Kubota ME8200 take?
The main coolant amount captured for the Kubota ME8200 is 2.38 gal (9 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota ME8200?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota ME8200, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota ME8200 use?
The captured antifreeze mix for the Kubota ME8200 is Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the ME8200 tractor to protect against freezing and overheating. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota ME8200 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota ME8200 coolant capacity?
The captured engine context is engine model V3300-TE, horsepower 86.7 hp (64.7 kW), and displacement 3.3 L (202 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
