The Kubota M130X coolant capacity is listed as 3.3 gal (12.5 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota M130X Coolant Capacity
| Cooling system capacity | 3.3 gal (12.5 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 130 hp (96.9 kW) |
| Engine displacement | 6.1 L (372.2 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M130X Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota M130X is 3.3 gal (12.5 L). Buy enough coolant before opening the drain plug |
|---|---|
| Coolant type note | For the Kubota M130X, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota M130X antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota M130X, the supporting engine specs are engine horsepower 130 hp (96.9 kW) and displacement 6.1 L (372.2 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota M130X: buy enough coolant for 3.3 gal (12.5 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota M130X Coolant Capacity FAQ
How much coolant does the Kubota M130X take?
The main coolant amount captured for the Kubota M130X is 3.3 gal (12.5 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota M130X?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota M130X, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota M130X use?
The captured antifreeze mix for the Kubota M130X is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota M130X coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Kubota M130X coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota M130X, the supporting engine data is horsepower 130 hp (96.9 kW) and displacement 6.1 L (372.2 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
