The Kubota M95GX-III coolant capacity is listed as 2.18 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota M95GX-III Coolant Capacity
| Coolant capacity | 2.18 gal (8.2 L) |
|---|---|
| Cooling system capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine displacement | 3.8 L (231.9 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine displacement comparison
Kubota M95GX-III Coolant and Engine Notes
| Coolant capacity note | For the Kubota M95GX-III, 2.18 gal (8.2 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine |
|---|---|
| Coolant type note | Use the right coolant formula for the Kubota M95GX-III: ethylene glycol-based coolant and ASTM D3306 compatible. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits |
| Antifreeze mix note | The Kubota M95GX-III antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota M95GX-III, the supporting engine specs are displacement 3.8 L (231.9 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | Coolant changes are simple but easy to do sloppily. On the Kubota M95GX-III, plan around 2.18 gal (8.2 L) and confirm the final level after air works out of the system |
Kubota M95GX-III Coolant Capacity FAQ
How much coolant does the Kubota M95GX-III take?
The main coolant amount captured for the Kubota M95GX-III is 2.18 gal (8.2 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota M95GX-III?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota M95GX-III, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.
What antifreeze mix does the Kubota M95GX-III use?
The captured antifreeze mix for the Kubota M95GX-III is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota M95GX-III coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota M95GX-III coolant capacity?
The captured engine context is displacement 3.8 L (231.9 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
