The Kubota L5060 coolant capacity is listed as 3 gal (11.3 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota L5060 Coolant Capacity
| Coolant capacity | 3 gal (11.3 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 700 hours |
| Engine horsepower | 52 hp (38.8 kW) |
| Engine displacement | 2.4 L (148.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L5060 Coolant and Engine Notes
| Coolant capacity note | The Kubota L5060 coolant spec points to 3 gal (11.3 L). Do not rely on the radiator-only amount if the full cooling-system capacity is available |
|---|---|
| Coolant type note | Coolant type for the Kubota L5060 is listed as ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The safest move is to use coolant that matches the manual’s spec rather than mixing random formulas |
| Antifreeze mix note | The 50/50 coolant and water mix mix gives the Kubota L5060 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Coolant change interval note | The captured coolant change interval for the Kubota L5060 is every 700 hours. Old coolant can lose corrosion protection even if the tractor still runs cool |
| Engine context note | The Kubota L5060 engine data captured here is engine horsepower 52 hp (38.8 kW) and displacement 2.4 L (148.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | When refilling the Kubota L5060, use 3 gal (11.3 L) as the planning number and 50/50 coolant and water mix as the mixture guide. Recheck the level after the thermostat opens |
Kubota L5060 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota L5060?
The Kubota L5060 cooling system capacity is shown as 3 gal (11.3 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota L5060?
Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota L5060?
Not for normal long-term use. The Kubota L5060 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota L5060?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota L5060 is every 700 hours.
Why does the Kubota L5060 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L5060, the supporting engine data is horsepower 52 hp (38.8 kW) and displacement 2.4 L (148.5 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
