The Kubota KL230 coolant capacity is listed as 2.3 gal (8.7 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota KL230 Coolant Capacity
| Coolant capacity | 2.3 gal (8.7 L) |
|---|---|
| Cooling system capacity | 2.3 gal (8.7 L) |
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 22.7 hp (16.9 kW) |
| Engine displacement | 1.5 L (91.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota KL230 Coolant and Engine Notes
| Coolant capacity note | For the Kubota KL230, 2.3 gal (8.7 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine |
|---|---|
| Radiator capacity note | Radiator capacity is listed as 2.17 gal (8.2 L). The full cooling system can be higher because coolant also sits in the engine and hoses |
| Coolant type note | The captured coolant type for the Kubota KL230 is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | The 50/50 coolant and water mix mix gives the Kubota KL230 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Engine context note | The Kubota KL230 engine data captured here is engine horsepower 22.7 hp (16.9 kW) and displacement 1.5 L (91.5 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | For a coolant change on the Kubota KL230, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota KL230 Coolant Capacity FAQ
What is the Kubota KL230 coolant capacity?
The Kubota KL230 coolant capacity is listed as 2.3 gal (8.7 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota KL230?
No. Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota KL230?
Premixed coolant can be fine if it matches ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and the required mix. The captured mix for the Kubota KL230 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota KL230?
The captured coolant change interval for the Kubota KL230 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Kubota KL230 coolant capacity?
The captured engine context is horsepower 22.7 hp (16.9 kW) and displacement 1.5 L (91.5 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
