The Kubota B7510 coolant capacity is listed as 1 gal (3.8 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota B7510 Coolant Capacity
| Coolant capacity | 1 gal (3.8 L) |
|---|---|
| Cooling system capacity | 1 gal (3.8 L) |
| Radiator capacity | 1 gal (3.8 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 21.1 hp (15.7 kW) |
| Engine displacement | 1 L (61.1 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota B7510 Coolant and Engine Notes
| Coolant capacity note | The Kubota B7510’s key coolant figure here is 1 gal (3.8 L) for coolant capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | The Kubota B7510 radiator figure is 1 gal (3.8 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | Coolant type for the Kubota B7510 is listed as ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. The safest move is to use coolant that matches the manual’s spec rather than mixing random formulas |
| Antifreeze mix note | The Kubota B7510 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota B7510, the supporting engine specs are engine horsepower 21.1 hp (15.7 kW) and displacement 1 L (61.1 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | When refilling the Kubota B7510, use 1 gal (3.8 L) as the planning number and 50/50 coolant and water mix as the mixture guide. Recheck the level after the thermostat opens |
Kubota B7510 Coolant Capacity FAQ
How much coolant does the Kubota B7510 take?
The main coolant amount captured for the Kubota B7510 is 1 gal (3.8 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota B7510?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota B7510, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota B7510 use?
The captured antifreeze mix for the Kubota B7510 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota B7510 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
Why does the Kubota B7510 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota B7510, the supporting engine data is horsepower 21.1 hp (15.7 kW) and displacement 1 L (61.1 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
