The Kubota MX4800 has a 3-point hitch lift capacity of 2,310 lb (1,048 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 9.5 gpm (36 L/min), and operating weight 3,729 lb (1,691 kg).
Best rear lift figure2,310 lb (1,048 kg)
Lift at 24 inches2,310 lb (1,048 kg)
Hitch categoryCategory 1
Operating weight3,729 lb (1,691 kg)
Kubota MX4800 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
2,310 lb (1,048 kg)
Hitch category
Category 1
Hydraulic pump flow
9.5 gpm (36 L/min)
Operating weight
3,729 lb (1,691 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,310 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,310 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
9.5 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,729 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota MX4800 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota MX4800 rear hitch spec points to 2,310 lb (1,048 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota MX4800, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota MX4800’s captured hydraulic pump flow is 9.5 gpm (36 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota MX4800 operating weight is listed as 3,729 lb (1,691 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota MX4800 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota MX4800 3-Point Hitch FAQ
What is the Kubota MX4800 3-point hitch lift capacity?
The Kubota MX4800 is listed with 2,310 lb (1,048 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota MX4800 24-inch lift capacity mean?
It means the Kubota MX4800 is rated to lift 2,310 lb (1,048 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota MX4800 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 2,310 lb (1,048 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota MX4800 lift?
Use the 2,310 lb (1,048 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 and operating weight 3,729 lb (1,691 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota MX4800?
Yes. The Kubota MX4800 lists hydraulic pump flow of 9.5 gpm (36 L/min) and operating weight of 3,729 lb (1,691 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
