The John Deere 2720 tractor hydraulic pump flow is 12 GPM, and hydraulic system pressure is 2,421 psi.
Hydraulic pump flow12 GPM
Implement flow10.5 GPM
Total hydraulic flow10.5 GPM
Hydraulic pressure2,421 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity15.6 qt (3.9 gal)
John Deere 2720 Hydraulic Flow Details
Hydraulic pump flow
12 GPM
Implement hydraulic flow
10.5 GPM
Total hydraulic flow
10.5 GPM
Hydraulic system pressure
2,421 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
15.6 qt (3.9 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
10.5 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
10.5 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,421 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
3.9 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2720 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 2720 is 10.5 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
The John Deere 2720’s hydraulic pressure is listed at 2,421 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (10.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2720 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 2720’s hydraulic fluid capacity is listed as 15.6 qt (3.9 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
