The John Deere 2555 tractor hydraulic pump flow is 21 GPM, and hydraulic system pressure is 2,320 psi.
Hydraulic pump flow21 GPM
Implement flow13 GPM
Total hydraulic flow13 GPM
Hydraulic pressure2,320 psi
Hydraulic system typeopen-center
John Deere 2555 Hydraulic Flow Details
Hydraulic pump flow
21 GPM
Implement hydraulic flow
13 GPM
Total hydraulic flow
13 GPM
Hydraulic system pressure
2,320 psi
Hydraulic system type
open-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
13 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
13 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,320 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
John Deere 2555 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 2555 is 13 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
At 2,320 psi, the John Deere 2555’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (13 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2555’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
