The Yanmar Sc2400 specifications include engine power rated at 24 hp (17.9 kW), a hydrostatic, 2-range transmission, and a listed weight of 1,280 lbs (580 kg).
Yanmar Sc2400 key specifications
| Engine power |
24 hp (17.9 kW) |
| PTO power |
16.5 hp (12.3 kW) |
| Displacement |
55.1 cu in (0.9 L) |
| Transmission |
hydrostatic, 2-range |
| Fuel capacity |
5.8 gal (22.0 L) |
| Weight |
1,280 lbs (580 kg) |
| Wheelbase |
55.1 inches (139 cm) |
Yanmar Sc2400 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power24 hp
Low 10 hpAverage 48.1 hpHigh 180 hp
PTO power16.5 hp
Low 10.8 hpAverage 48.8 hpHigh 139 hp
Displacement0.9 L
Low 0.4 LAverage 2.6 LHigh 7.3 L
Fuel capacity5.8 gal
Low 2.4 galAverage 19.9 galHigh 79.3 gal
Weight1,280 lbs
Low 1,090 lbsAverage 5,021.9 lbsHigh 12,875 lbs
Wheelbase55.1 in
Low 47.5 inAverage 78.6 inHigh 112.2 in
This model Industry average
Yanmar Sc2400 power chart
Compare the available engine, PTO and drawbar power ratings.
Yanmar Sc2400 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity22 L
Yanmar Sc2400 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
2.835 × 2.913 inches (72 × 74 mm) |
| Rated RPM |
3,300 |
| Fuel system |
indirect injection |
| Air cleaner |
4-inch dry element |
| Oil capacity |
2.5 qt (2.4 L) |
| Coolant capacity |
3.4 qt (3.2 L) |
| Starter |
electric |
| Starter volts |
12 |
| Net engine power |
20.4 hp (15.2 kW) |
Transmission options
| Gears |
infinite forward and reverse (2-range) |
| Oil capacity |
8 qt (7.6 L) |
| Transmission type |
hydrostatic |
PTO and hitch
| Rear hitch category |
Category 1 (LIMITED) |
| Hitch control |
position control |
| Rear lift (at 24"/610mm) |
661 lbs (299 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm, 1.375-inch shaft |
| PTO engine speed |
540 PTO rpm at 3,111 engine rpm or 2,100 PTO rpm at 3,338 engine rpm |
| Mid PTO |
independent |
| Mid PTO speed |
2,100 rpm |
Hydraulics
| Hydraulic type |
open center |
| Pump flow |
3.5 gpm (13.2 L/min) |
| Total flow |
6.9 gpm (26.1 L/min) |
| Steering flow |
3.4 gpm (12.9 L/min) |
Mechanical specifications
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
40 |
| Battery volts |
12 |
Dimensions and weight
| Length |
95.5 inches (242 cm) |
| Width |
44.5 inches (113 cm) |
| Ground clearance |
7.5 inches (19 cm) |
Tires and tread
| Front tire |
18-8.5-10 |
| Rear tire |
26-12.0-12 |
Attachments
| Attachment type |
mid-mount Yanmar MM60RSe |
| Cutting width |
60 inches (152 cm) |
| Cut height |
1 to 4 inch 2 to 10 cm |
| Raise time |
3.5 seconds |
| dump |
1.5s |
| Lowering time |
2.5 seconds |
| Rollback time |
2.0 seconds |
| Bucket width |
48 inches (121 cm) |
| Bucket capacity |
0.185 cu yd 0.1 cu m |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Yanmar website or the tractor’s operator manual.
