The Yanmar SA222 specifications include engine power rated at 21.6 hp (16.1 kW), a hydrostatic, 2-range transmission, and a listed weight of 1,631 to 2,121 lbs.
Yanmar SA222 key specifications
| Engine power |
21.6 hp (16.1 kW) |
| PTO power |
14.8 hp (11.0 kW) |
| Displacement |
55.1 cu in (0.9 L) |
| Transmission |
hydrostatic, 2-range |
| Fuel capacity |
6.1 gal (23.1 L) |
| Weight |
1,631 to 2,121 lbs |
| Wheelbase |
57.9 inches (147 cm) |
Yanmar SA222 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power21.6 hp
Low 10 hpAverage 48.1 hpHigh 180 hp
PTO power14.8 hp
Low 10.8 hpAverage 48.8 hpHigh 139 hp
Displacement0.9 L
Low 0.4 LAverage 2.6 LHigh 7.3 L
Fuel capacity6.1 gal
Low 2.4 galAverage 19.9 galHigh 79.3 gal
Maximum listed weight2,121 lbs
Low 1,090 lbsAverage 5,021.9 lbsHigh 12,875 lbs
Wheelbase57.9 in
Low 47.5 inAverage 78.6 inHigh 112.2 in
This model Industry average
Yanmar SA222 power chart
Compare the available engine, PTO and drawbar power ratings.
Yanmar SA222 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity23.1 L
Yanmar SA222 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
2.83 × 2.91 inches (72 × 74 mm) |
| Rated RPM |
3,000 |
| Torque |
38.8 lb-ft (52.6 Nm) |
| Oil capacity |
3.1 qt (2.9 L) |
| Coolant capacity |
3.5 qt (3.3 L) |
| Starter |
electric |
| Starter volts |
12 |
Transmission options
| Gears |
infinite forward and reverse (2-range) |
| Oil capacity |
16.4 qt (15.5 L) |
| Transmission type |
hydrostatic |
PTO and hitch
| Rear hitch category |
Category I (LIMITED) |
| Rear lift (at 24"/610mm) |
661 lbs (299 kg) |
| Rear PTO |
independent |
| Rear PTO speed |
540 rpm, 1.375-inch shaft |
| Mid PTO |
independent |
| Mid PTO speed |
SAE 16/32 |
| PTO engine speed |
2,000 PTO rpm at 3,111 engine rpm |
Hydraulics
| Hydraulic type |
open center |
| Hydraulic pressure |
1,885 psi (130.0 bar) |
| Mid valves |
2 |
| Pump flow |
4 gpm (15.1 L/min) |
| Steering flow |
3.5 gpm (13.2 L/min) |
Mechanical specifications
| Clutch |
540:3,120 |
| Front axle type |
3.2 qt (3.0 L) |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Battery volts |
12 |
Dimensions and weight
| Listed weight range |
1,631 to 2,121 lbs |
| Length |
106.3 inches (270 cm) |
| Width |
47.1 inches (119 cm) |
| Ground clearance |
9.7 inches (24 cm) |
| ROPS height |
89.5 inches (227 cm) |
| Cab height |
80.2 inches (203 cm) |
| ROPS height |
1,631 lbs (739 kg) |
| Cab height |
2,121 lbs (962 kg) |
| ROPS Max capacity |
3,252 lbs (1,475 kg) |
| Cab Max capacity |
3,748 lbs (1,700 kg) |
| Maximum front axle load |
1,543 lbs (699 kg) |
| Maximum rear axle load |
2,205 lbs (1,000 kg) |
| Tow capacity |
1,543 lbs (699 kg) |
Tires and tread
| Front tread |
35.2 inches (89 cm) |
| Rear tread |
35.2 inches (89 cm) |
| Lawn/turf front tire |
18-8.50-10 |
| Lawn/turf rear tire |
26-12.0-12 |
| Industrial front tire |
18-8.50-10 |
| Industrial rear tire |
26-12.0-12 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Yanmar website or the tractor’s operator manual.
