The New Holland TM115 tractor primary air filter part number is 82028151. The outer air filter is 87408704.
New Holland TM115 Air Filter Details
Primary air filter part number
82028151
Outer air filter part number
87408704
Cross-reference part numbers
TM115
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
New Holland TM115 Extra Air Filter Notes
Engine displacement
7.5 L | 457.7 cu in
Engine horsepower
115 hp | 85.8 kW
Primary filter note
For the New Holland TM115, the listed primary air filter part number is 82028151. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 87408704.
Safety filter note
If your air cleaner has an inner safety element, leave it in place while servicing the outer filter so dirt cannot fall into the intake.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
A similar horsepower rating does not guarantee the same filter if displacement or engine family changes. Use the engine data as a sanity check only.
Cross-reference note
Possible cross-reference numbers found for the New Holland TM115: TM115. Treat these as secondary checks after the primary filter number.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
New Holland TM115 Air Filter FAQs
What is the safest way to match a New Holland TM115 air filter?
If the old filter is missing, use 82028151 plus the housing measurements as a two-step check. If either the seal or cover depth is wrong, do not run it.
Is the New Holland TM115 air filter a one-part or multi-part service?
Because no clean inner safety number is shown, treat the visible outer/primary numbers as the main service parts and inspect the housing before assuming there is no safety element.
What part-number mistake should I avoid on a New Holland TM115?
Use the full 82028151 string. Do not trim suffixes or ignore letters; small part-number changes can mean a different seal or element length.
Can a cross-reference filter fit badly on a New Holland TM115?
A single cross-reference can help when 82028151 is unavailable, but it should not override the old filter, seal shape or housing label.
Why does the New Holland TM115 horsepower class matter for filters?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
How do I avoid mixing up New Holland TM115 outer and safety filters?
The outer number gives another fitment checkpoint, but no clean inner safety number is shown. Inspect the housing before assuming the setup is complete.
Why not buy a New Holland TM115 air filter from model name alone?
The engine detail helps identify the likely intake setup, but it does not replace checking the removed element. Air-cleaner housings can change inside the same model family.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official newholland.com website before ordering or installing an air filter.
