The New Holland TL5060 tractor engine horsepower is 100 hp | 74.6 kW, and PTO horsepower is 87.5 hp | 65.2 kW.
Engine HP100 hp | 74.6 kW
PTO HP87.5 hp | 65.2 kW
PTO Transfer87.5%
Torque269.2 lb-ft | 365.0 Nm
Displacement253.6 ci | 4.2 L
New Holland TL5060 Horsepower Specs
Engine horsepower
100 hp | 74.6 kW
PTO horsepower claimed
87.5 hp | 65.2 kW
New Holland TL5060 Useful Horsepower Calculations
PTO-to-engine power transfer
87.5% of engine hp reaches the PTO
Engine size per PTO horsepower
2.9 ci per PTO hp
PTO horsepower per liter
20.8 PTO hp per L
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
23.8 engine hp per L
Torque per PTO horsepower
3.1 lb-ft per PTO hp
Rated speed per PTO horsepower
28.6 rpm per PTO hp
New Holland TL5060 Engine Specs
Engine type
turbocharged diesel
Displacement
253.6 ci | 4.2 L
Bore and stroke
4.134×4.724 inches | 105 x 120 mm
Emissions
Tier 1
Rated RPM
2500
Torque
269.2 lb-ft | 365.0 Nm
Torque RPM
1400
New Holland TL5060 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
New Holland TL5060 Horsepower Comparison Charts
Engine horsepower comparison
This model
100 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
87.5 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
253.6 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
269.2 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,500 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
2.9 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland TL5060 Horsepower FAQ
How much horsepower does the New Holland TL5060 have?
The listed engine output is 100 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 100 hp.
How much PTO horsepower does the New Holland TL5060 have?
The listed PTO output is 87.5 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 87.5 hp.
How much engine power reaches the PTO on the New Holland TL5060?
The PTO-to-engine transfer works out to 87.5%, from 100 engine hp to 87.5 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the New Holland TL5060 engine?
The engine displacement is 253.6 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the New Holland TL5060 engine stressed for its PTO horsepower?
The engine has about 2.9 cubic inches per PTO hp, using 253.6 ci and 87.5 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the New Holland TL5060 make?
The output density is about 20.8 PTO hp per liter, using 87.5 PTO hp and 4.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the New Holland TL5060 have?
The listed torque is 269.2 lb-ft, above the 240 lb-ft benchmark average. The 269.2 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the New Holland TL5060 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.1 lb-ft per PTO hp, using 269.2 lb-ft and 87.5 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the New Holland TL5060 rated at?
The rated speed is 2,500 rpm, above the 2,200 rpm benchmark average. A higher 2,500 rpm rating can make power well but may feel busier under load.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
