The New Holland TC40A tractor engine horsepower is 40 hp | 29.8 kW.
Engine HP40 hp | 29.8 kW
Displacement121.7 ci | 2.0 L
New Holland TC40A Horsepower Specs
Engine gross horsepower
40 hp | 29.8 kW
New Holland TC40A Useful Horsepower Calculations
Engine size per engine horsepower
3 ci per engine hp
Engine horsepower per liter
20 engine hp per L
New Holland TC40A Engine Specs
Displacement
121.7 ci | 2.0 L
Bore and stroke
3.307×3.543 inches | 84 x 90 mm
Compression
22.5:1
Rated RPM
2600
New Holland TC40A Fuel, Cooling, Starting & Service Specs
Fuel capacity
13 gal | 49.2 L
Starter volts
12
Battery volts
12
Firing order
1-3-4-2
Idle RPM
1025-2855
New Holland TC40A Horsepower Comparison Charts
Engine horsepower comparison
This model
40 hp
Average
35 hp
Low
15 hp
High
60 hp
Displacement comparison
This model
121.7 ci
Average
110 ci
Low
50 ci
High
180 ci
Rated RPM comparison
This model
2,600 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland TC40A Horsepower FAQ
How much horsepower does the New Holland TC40A have?
The listed engine output is 40 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 40 hp.
How big is the New Holland TC40A engine?
The engine displacement is 121.7 ci, close to the 110 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
What rpm is the New Holland TC40A rated at?
The rated speed is 2,600 rpm, close to the 2,400 rpm benchmark average. The 2,600 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
