Weight summary
The published New Holland TC40 weight is 2,998–3,497 lb (1,359–1,586 kg). The primary figure used for comparisons is 2,998 lb (1,359 kg), listed as 2WD Shipping. The published configurations span 499 lb, a 16.6% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | New Holland |
|---|---|
| Model | TC40 |
| Category | Farm tractor |
| Model years | 2001 – 2003 |
| Tractor type | Utility Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD Shipping | — | 2,998 lb | 1,359 kg | 1.5 | — |
| 4WD Shipping | — | 3,147 lb | 1,427 kg | 1.57 | — |
| 4WD Shipping | — | 3,328 lb | 1,509 kg | 1.66 | — |
| 4WD SuperSteer Shipping | — | 3,497 lb | 1,586 kg | 1.75 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Farmall 100 (3000 lb)
- John Deere 3120 (3000 lb)
- John Deere 4300 (3000 lb)
- Massey Ferguson 30 (3000 lb)
- Massey Ferguson 1440 (3001 lb)
Closest comparable tractors
- John Deere 3120 (3000 lb)
- Massey Ferguson 1440 (3001 lb, 40.1 hp)
- Massey Ferguson 1540 (3058 lb, 40.1 hp)
- Case IH Farmall 35A Series II (3067 lb)
- Case IH Farmall 40A Series II (3067 lb)
New Holland TC40 weight FAQ
How much does a New Holland TC40 weigh?
The New Holland TC40 weighs 2,998 lb (1,359 kg) using the published 2WD Shipping figure. Across the published configurations on this page, weight ranges from 2,998 to 3,497 lb (1,359 to 1,586 kg).
How much heavier is the 4WD New Holland TC40 than the 2WD model?
Published 2WD weight is 2,998 lb (1,360 kg), while published 4WD weight is 3,147–3,497 lb (1,427–1,586 kg). On a midpoint basis, the published 4WD configurations are about 324 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the New Holland TC40 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 31st percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 2,265 lb lighter than the peer-group average of 5,263 lb.
How wide is the New Holland TC40 for transport?
The maximum published tractor width is 61.3 in (5.1 ft). That is 40.7 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the New Holland TC40 weight-to-horsepower ratio?
Using the page’s representative 2,998 lb weight and 40 hp power figure, the tractor carries about 75 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the New Holland TC40 weigh?
The representative published weight is about 1.5 US tons, while the full published range is 1.5–1.75 US tons. Loaded transport weight can be higher than the tractor specification.


