The New Holland LS 160 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 650 CCA rating is low for New Holland skid-steers in this dataset.
ModelLS 160
BrandNew Holland
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
650 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other New Holland skid-steer battery ratings in this dataset.
Cold cranking amps650 CCA
Low
LowAverageHigh
Low 550 CCAMedian 800 CCAHigh 1250 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
650 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the New Holland LS 160 skid steer loader is typically located under the side engine cover, which may require removing some components for access. For specific replacement specifications, it's best to consult the owner's manual or a dealer for detailed information.
ID
Model details
Equipment identity
Brand
New Holland
Model
LS 160
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a New Holland LS 160 skid steer, you typically need to remove the side engine cover and the muffler support brace to access the battery. Depending on your model, you may also need to remove the bottom skid plate for better access.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the New Holland LS 160?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (L160); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the New Holland LS 160 need?
Quick answer
The recommended battery for the New Holland LS160 Skid Steer Loader typically has a Cold Cranking Amperage (CCA) of 650 amps. It's important to verify the specific battery model and specifications based on your machine's requirements.
?
What voltage battery does the New Holland LS 160 use?
Quick answer
The New Holland LS160 skid steer loader operates on a 12-volt electrical system.
?
Where is the battery on the New Holland LS 160?
Quick answer
The battery on the New Holland LS 160 skid steer loader is typically located under the side engine cover, which may require removing some components for access. For specific replacement specifications, it's best to consult the owner's manual or a dealer for detailed information.
?
What is the best replacement battery for the New Holland LS 160?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 31 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the New Holland website for manufacturer information.
