The New Holland 8240 tractor primary air filter part number is 87309963. The inner safety filter is 82028151.
New Holland 8240 Air Filter Details
| Primary air filter part number | 87309963 |
|---|---|
| Inner safety air filter part number | 82028151 |
| Outer air filter part number | 82028151 |
| Air filter dimensions | Outside diameter: 12 in | Inside diameter: 6 in |
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Listed Filter Size Check
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
New Holland 8240 Extra Air Filter Notes
| Engine horsepower | 96 hp | 71.6 kW |
|---|---|
| Primary filter note | For the New Holland 8240, the listed primary air filter part number is 87309963. Match the number before buying because air cleaner setups can vary by engine, serial range and market. |
| Outer filter note | The listed outer air filter part number is 82028151. |
| Safety filter note | The listed inner safety air filter is 82028151. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked. |
| Fitment note | Listed dimensions: Outside diameter: 12 in | Inside diameter: 6 in. Use dimensions as a second check, not as the only buying method. |
| Filter size note | The listed dimensions point to a large outside diameter at 12 in. Use that as a fitment sanity check against the old filter. |
| Power range note | At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule. |
| Service note | Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test. |
New Holland 8240 Air Filter FAQs
How do I avoid buying the wrong New Holland 8240 air filter?
If the old filter is missing, use 87309963 plus the housing measurements as a two-step check. If either the seal or cover depth is wrong, do not run it.
Should I order one filter or a full New Holland 8240 air-filter set?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 82028151 when you meant the safety filter, or 82028151 when you meant the outer filter.
Should I trust New Holland 8240 air-filter dimensions or the part number?
This size value is useful for screening listings, not confirming fit. Two filters can share a outside diameter and still have different seal geometry.
How can part-number style help check a New Holland 8240 filter?
Multiple numbers are useful only if each one is tied to the correct element position. Wrong element in the right brand is still wrong.
What is the biggest fitment trap with the New Holland 8240 air filter?
The trap is assuming a large outside-diameter element is close enough because it looks right online. The seal face, end-cap depth and cover pressure have to match, otherwise dust can bypass the media.
Can the New Holland 8240 lose power from a dirty air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Is the New Holland 8240 outer filter the same as the primary filter?
The presence of both outer and inner numbers means you should order carefully. A kit can be convenient, but only if it contains the correct service element and safety element.
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official newholland.com website before ordering or installing an air filter.
