In specification terms, the Mitsubishi fd35n3 Forklift (2020-2026) shows low engine power at 48.3 hp (36 kW) alongside low weight at 10,626 lb (4.82 t). The listed total width is 4.23 ft (1,290 mm).
Specification profile
Forklift ⢠2020-2026
Weight: 10,626 lb (4.82 t)Engine power: 48.3 hp (36 kW)Engine speed at max torque: 2,250 rpmTotal Width: 4.23 ft (1,290 mm)
10,626 lb (4.82 t)Weight
48.3 hp (36 kW)Engine power
2,250 rpmEngine speed at max torque
4.23 ft (1,290 mm)Total Width
7.14 ft (2,175 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
16.5/18 km/hTravel Speed With / Without Load
177/1800 NmMaximum torque
How it compares
Low, average or high?
Engine power
Low
48.3 hp (36 kW)
Low 38.9 hp (29 kW)Typical 121 hp (90 kW)High 355 hp (265 kW)
Engine power is well below the typical figure.
Weight
Low
10,626 lb (4.82 t)
Low 5,952 lb (2.7 t)Typical 32,141 lb (14.6 t)High 131,616 lb (59.7 t)
Weight is well below the typical figure.
Turning Radius
Low
8.01 ft (2.44 m)
Low 6.43 ft (1.96 m)Typical 12 ft (3.65 m)High 26.2 ft (8 m)
Turning Radius is well below the typical figure.
Construction Height
Below average
7.14 ft (2,175 mm)
Low 6.79 ft (2,070 mm)Typical 9.06 ft (2,761 mm)High 14 ft (4,269 mm)
Construction Height is below the typical figure.
Displacement
Below average
0.88 US gal (3.33 L)
Low 0.47 US gal (1.79 L)Typical 1.15 US gal (4.35 L)High 2.86 US gal (10.8 L)
Displacement is below the typical figure.
Lifting Height
Low
10.8 ft (3.3 m)
Low 8.99 ft (2.74 m)Typical 14.9 ft (4.53 m)High 53.5 ft (16.3 m)
Lifting Height is well below the typical figure.
Visual overview
Key measurements
Measurements
Related measurements grouped for faster scanning.
Related measurements
Additional published measurements that share the same unit.
Overview
Model information
| Manufacturer | Mitsubishi |
|---|---|
| Model | fd35n3 |
| Category | Forklift |
| Model year / production | 2020-2026 |
Full specifications
Technical details
Performance
Engine power48.3 hp (36 kW)
Maximum torque177/1800 Nm
Engine speed at max torque2,250 rpm
Travel Speed With / Without Load16.5/18 km/h
Dimensions
Construction Height7.14 ft (2,175 mm)
Lifting Height10.8 ft (3.3 m)
Total Width4.23 ft (1,290 mm)
Turning Radius8.01 ft (2.44 m)
Capacity & weight
Weight10,626 lb (4.82 t)
Hoisting With / Without Load0.41/0.43 m/s
Lowering With Load0.5/0.5 m/s
Nominal Load at COG7,716 lb (3.5 t)
Engine & drivetrain
Displacement0.88 US gal (3.33 L)
Emission levelV
Engine manufacturerk.A.
Engine typeD04EG
Number of cylinders4.0
Transmission TypeW
Setup & fitment
Standard tyresSE 2x/2
Other specifications
Model seriesGrendia ES
Centre of Gravity19.7 in (500 mm)
Max. Climbing Ability33 %
Related Posts:
