The Massey Ferguson Super 90 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 2 gpm | 7.6 lpm.
Hydraulic Flow2 gpm | 7.6 lpm
Massey Ferguson Super 90 Hydraulic Capacity & Flow Specs
Pump flow
2 gpm | 7.6 lpm
Total hydraulic flow
4.5 gpm | 17.0 lpm
Massey Ferguson Super 90 Useful Hydraulic Calculations
Total flow vs pump flow
225% of listed pump flow
Massey Ferguson Super 90 Hydraulic Comparison Charts
Pump flow comparison
This model
2 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson Super 90 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Independent dry disc brakes
Differential lock
mechanical rear
Massey Ferguson Super 90 Hydraulic Capacity FAQ
Why is the Massey Ferguson Super 90 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson Super 90, but pump flow is 2 gpm | 7.6 lpm. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson Super 90 hydraulics feel fast or slow?
The useful speed clue is 2 gpm | 7.6 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson Super 90?
On the Massey Ferguson Super 90, 2 gpm | 7.6 lpm pump flow points to slower loader and cylinder movement. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson Super 90?
For implement matching, the useful checks are 2 gpm flow. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Will the Massey Ferguson Super 90 hydraulics handle long hydraulic jobs?
The useful heat clues are 2 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Massey Ferguson Super 90 hydraulics?
For service planning, flow is listed at 2 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
