The Massey Ferguson 820 tractor primary air filter part number is 7068069M1. The inner safety filter is 7067437M1.
Massey Ferguson 820 Air Filter Details
Primary air filter part number
7068069M1
Inner safety air filter part number
7067437M1
Outer air filter part number
Same as primary air filter
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
250 hrs
Light use
500 hrs
These are practical inspection/replacement guide ranges for the compact tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 820 Extra Air Filter Notes
Engine model
Power 4.4L
Engine displacement
4.4 L | 268.5 cu in
Engine horsepower
20 hp | 14.9 kW
Primary filter note
For the Massey Ferguson 820, the listed primary air filter part number is 7068069M1. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The outer air filter for the Massey Ferguson 820 appears to be the same listed item as the primary filter.
Safety filter note
The listed inner safety air filter is 7067437M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
For a smaller tractor, the filter may not look dramatic, but dirt ingestion is still the killer. Dry mowing, loader work and chaff are bigger triggers than engine hours alone.
Engine airflow note
The displacement helps identify the engine family; horsepower tells you how hard it breathes under load. The element still has to match the canister.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 820 Air Filter FAQs
What should I check before ordering a Massey Ferguson 820 air filter?
The buying order should be: old filter number first, housing fit second, then cross-reference. Start with 7068069M1, but do not ignore the a primary/outer service element plus an inner safety element.
Should I order one filter or a full Massey Ferguson 820 air-filter set?
For normal service, the primary/outer element is the one that does the dirty work. The inner safety element is backup protection, so replace it less often and keep it seated while cleaning the housing.
Does engine power change how I service the Massey Ferguson 820 air filter?
For a smaller tractor, the filter may not look dramatic, but dirt ingestion is still the killer. Dry mowing, loader work and chaff are bigger triggers than engine hours alone.
How do I avoid mixing up Massey Ferguson 820 outer and safety filters?
If a seller tries to sell a separate outer element for this listing, compare it to the primary number first. It may just be duplicate naming.
Can I ignore letters or suffixes in the Massey Ferguson 820 filter number?
The primary number looks like a Massey-style M-suffix number. That does not make it automatically correct, but it helps you spot obvious nonsense numbers in search results.
How does engine data help with a Massey Ferguson 820 air-filter check?
This is a larger utility-displacement / small compact type setup, so airflow is not just a trivia spec. A bad seal or restricted element can show up as smoke, heat or weak pull.
What mistake ruins the point of the Massey Ferguson 820 safety filter?
Do not treat the safety filter like a second primary filter. It should stay protected; once it is dirty, replace it instead of trying to revive it with air pressure.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
