The Massey Ferguson 7726S tractor cooling system capacity is 26.7 gal | 101 L, coolant type is 50/50 ethylene glycol-based coolant, and coolant change interval is every 500 hours.
Massey Ferguson 7726S Coolant Capacity Details
Cooling system capacity
26.7 gal | 101 L
Coolant type
50/50 ethylene glycol-based coolant
Coolant change interval
Every 500 hours
Coolant mixture ratio
50/50 antifreeze and water
Radiator cap pressure
13 psi | 90 kPa
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
26.7 gal
Average
16 gal
Low
10 gal
High
28 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the large ag tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 7726S Extra Coolant Notes
Engine horsepower
240 hp | 179 kW
Engine displacement
7.4 L | 452 cu in
Capacity note
For the Massey Ferguson 7726S, the listed cooling system capacity is 26.7 gal | 101 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
50/50 antifreeze and water.
Radiator cap note
The radiator cap pressure listed for the Massey Ferguson 7726S is 13 psi | 90 kPa. Do not replace it with a random cap unless the pressure rating matches.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 7726S Coolant FAQs
How much coolant does a Massey Ferguson 7726S take?
The Massey Ferguson 7726S takes 26.7 gal | 101 L of coolant. That is above the average large ag tractor benchmark, so buy enough coolant before starting instead of relying on one spare jug.
Is 26.7 gal | 101 L a lot of coolant for a Massey Ferguson 7726S?
Yes. For this tractor category, 26.7 gal | 101 L is above average. This is the sort of refill where you want all coolant on hand before draining, because stopping halfway through the job is annoying and messy.
How many coolant jugs do I need for a Massey Ferguson 7726S?
Do not underestimate this refill. A 26.7 gal | 101 L system needs about 27 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 13.3 gal of concentrate and 13.3 gal of distilled water. In metric terms, that is roughly 21 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 7726S?
The listed coolant is 50/50 ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent. The listed mix is 50/50 antifreeze and water, so do not run straight water except as a short emergency move.
How much concentrate and water does a Massey Ferguson 7726S need?
With the listed 50/50 antifreeze and water mix, a full 26.7 gal | 101 L refill works out to about 13.3 gal of antifreeze concentrate and 13.3 gal of distilled water. If using premix, do not add extra water unless the product label says to.
Can I use a different radiator cap on a Massey Ferguson 7726S?
The listed cap pressure is 13 psi | 90 kPa. That higher-pressure cap helps raise the boiling point, but only if the radiator neck, hoses and overflow path are in good shape. A weak cap or damaged seat can still cause coolant loss.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
