The Massey Ferguson 7170 tractor cooling system capacity is 12.5 gal | 47.3 L, coolant type is 50/50 ethylene glycol-based coolant, and coolant change interval is massey Ferguson recommends changing coolant as part of the annual service interval, which aligns with the 500‑hour.
Massey Ferguson 7170 Coolant Capacity Details
Cooling system capacity
12.5 gal | 47.3 L
Coolant type
50/50 ethylene glycol-based coolant
Coolant change interval
Massey Ferguson recommends changing coolant as part of the annual service interval, which aligns with the 500‑hour
Radiator cap pressure
10 psi | 70 kPa
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
12.5 gal
Average
10 gal
Low
6 gal
High
16 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the row-crop tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 7170 Extra Coolant Notes
Engine horsepower
170 hp | 126.8 kW
Engine displacement
6.6 L | 402 cu in
Capacity note
For the Massey Ferguson 7170, the listed cooling system capacity is 12.5 gal | 47.3 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
Use the coolant type listed above and match the antifreeze/water mix to the operator manual and local freezing conditions.
Radiator cap note
The radiator cap pressure listed for the Massey Ferguson 7170 is 10 psi | 70 kPa. Do not replace it with a random cap unless the pressure rating matches.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 7170 Coolant FAQs
How much coolant does a Massey Ferguson 7170 take?
The Massey Ferguson 7170 takes 12.5 gal | 47.3 L of coolant. That is about normal for the row-crop tractor benchmark shown here, so plan it like a standard drain-and-refill rather than a tiny top-up.
Is the Massey Ferguson 7170 coolant capacity normal?
Yes, 12.5 gal | 47.3 L lands about where you would expect for this tractor category. The main thing is buying enough for a complete refill plus a small top-off amount.
How many coolant jugs do I need for a Massey Ferguson 7170?
Do not underestimate this refill. A 12.5 gal | 47.3 L system needs about 13 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 6.2 gal of concentrate and 6.2 gal of distilled water. In metric terms, that is roughly 10 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 7170?
The listed coolant is 50/50 ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent.
Can I use a different radiator cap on a Massey Ferguson 7170?
The listed cap pressure is 10 psi | 70 kPa. Use the same pressure rating when replacing it. The cap is part of the cooling system, not just a lid, and the wrong rating can cause boil-over, leaks or pressure problems.
When should the Massey Ferguson 7170 coolant be changed?
The listed interval is massey Ferguson recommends changing coolant as part of the annual service interval, which aligns with the 500‑hour. Hour-based service matters most on working tractors that spend long periods hot under load.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
