The Massey Ferguson 6716S tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26.4 gpm (open) | 99.9 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is open center.
about 44.7 hydraulic hp from listed pressure and pump flow
Massey Ferguson 6716S Hydraulic Comparison Charts
Pump flow comparison
This model
26.4 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,900 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
11,244 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 6716S hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 6716S, but pump flow is 26.4 gpm (open) | 99.9 lpm, pressure is 2900 psi | 200.0 bar, system type is open center, and lift is listed as 11244 lbs | 5100 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 6716S hydraulics feel fast or slow?
The useful speed clue is 26.4 gpm (open) | 99.9 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 6716S hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 6716S?
On the Massey Ferguson 6716S, 26.4 gpm (open) | 99.9 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 11,244 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 6716S?
For implement matching, the useful checks are 26.4 gpm flow, 2,900 psi pressure, 11,244 lb listed lift, and 5 Optional remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 6716S rear lift capacity strong?
The listed lift figure is 11244 lbs | 5100 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 6716S hydraulic remotes enough?
The Massey Ferguson 6716S remote/valve listing is 5 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 6716S hydraulics handle long hydraulic jobs?
The useful heat clues are 26.4 gpm flow, 2,900 psi pressure, and about 44.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 6716S make on paper?
Using 2,900 psi and 26.4 gpm, the rough pressure-flow estimate is about 44.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 6716S hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III and listed lift is 11244 lbs | 5100 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
