The Massey Ferguson 5S.145 tractor cooling system capacity is 13.2 gal | 50 L, coolant type is ethylene glycol-based coolant, and coolant change interval is every 600 hours or 2 years.
Massey Ferguson 5S.145 Coolant Capacity Details
Cooling system capacity
13.2 gal | 50 L
Coolant type
Ethylene glycol-based coolant
Coolant change interval
Every 600 hours or 2 years
Coolant mixture ratio
The Massey Ferguson 5S.145 tractor uses an All-in-One Stage V engine and requires a coolant mixture of 50% antifreeze and 50% water for optimal protection
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
This model
13.2 gal
Average
10 gal
Low
6 gal
High
16 gal
Benchmarks use practical low, average and high coolant-capacity ranges for the row-crop tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 5S.145 Extra Coolant Notes
Engine horsepower
145 hp | 108.1 kW
Engine displacement
4.4 L | 268 cu in
Capacity note
For the Massey Ferguson 5S.145, the listed cooling system capacity is 13.2 gal | 50 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out.
Mixture note
The Massey Ferguson 5S.145 tractor uses an All-in-One Stage V engine and requires a coolant mixture of 50% antifreeze and 50% water for optimal protection.
Refill note
Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure.
Massey Ferguson 5S.145 Coolant FAQs
How much coolant does a Massey Ferguson 5S.145 take?
The Massey Ferguson 5S.145 takes 13.2 gal | 50 L of coolant. That is about normal for the row-crop tractor benchmark shown here, so plan it like a standard drain-and-refill rather than a tiny top-up.
Is the Massey Ferguson 5S.145 coolant capacity normal?
Yes, 13.2 gal | 50 L lands about where you would expect for this tractor category. The main thing is buying enough for a complete refill plus a small top-off amount.
How many coolant jugs do I need for a Massey Ferguson 5S.145?
Do not underestimate this refill. A 13.2 gal | 50 L system needs about 14 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 6.6 gal of concentrate and 6.6 gal of distilled water. In metric terms, that is roughly 10 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 5S.145?
The listed coolant is ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent. The listed mix is the Massey Ferguson 5S.145 tractor uses an All-in-One Stage V engine and requires a coolant mixture of 50% antifreeze and 50% water for optimal protection, so do not run straight water except as a short emergency move.
How much concentrate and water does a Massey Ferguson 5S.145 need?
With the listed the Massey Ferguson 5S.145 tractor uses an All-in-One Stage V engine and requires a coolant mixture of 50% antifreeze and 50% water for optimal protection mix, a full 13.2 gal | 50 L refill works out to about 6.6 gal of antifreeze concentrate and 6.6 gal of distilled water. If using premix, do not add extra water unless the product label says to.
When should the Massey Ferguson 5S.145 coolant be changed?
Use whichever limit comes first for the Massey Ferguson 5S.145: every 600 hours or 2 years. Low-hour tractors can still age out on time, because corrosion protection gets weaker even when the coolant still looks clean.
Official information note
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
