The Massey Ferguson 5460SA tractor primary air filter part number is 7068311M91. The outer air filter is 7068069M1.
Massey Ferguson 5460SA Air Filter Details
Primary air filter part number
7068311M91
Outer air filter part number
7068069M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
400 hrs
Light use
800 hrs
These are practical inspection/replacement guide ranges for the row-crop tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 5460SA Extra Air Filter Notes
Engine horsepower
105 hp | 78.3 kW
Primary filter note
For the Massey Ferguson 5460SA, the listed primary air filter part number is 7068311M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
If your air cleaner has an inner safety element, leave it in place while servicing the outer filter so dirt cannot fall into the intake.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 5460SA Air Filter FAQs
Which Massey Ferguson 5460SA air-filter parts should be changed together?
Because no clean inner safety number is shown, treat the visible outer/primary numbers as the main service parts and inspect the housing before assuming there is no safety element.
What is the safest way to match a Massey Ferguson 5460SA air filter?
Do not buy from the title alone. Match 7068311M91 against the removed filter, then check gasket shape, end-cap depth and cover fit before starting the tractor.
Can the Massey Ferguson 5460SA lose power from a dirty air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Should I buy separate outer and primary filters for a Massey Ferguson 5460SA?
This listing gives you the service-element side of the setup. The housing still needs to be checked for a safety element.
What part-number mistake should I avoid on a Massey Ferguson 5460SA?
Use the full 7068311M91 string. Do not trim suffixes or ignore letters; small part-number changes can mean a different seal or element length.
What mistake ruins the point of the Massey Ferguson 5460SA safety filter?
The clean data does not show an inner safety number, so check the housing before assuming it is a single-element cleaner.
Why not buy a Massey Ferguson 5460SA air filter from model name alone?
In the heavy utility class, a bad air filter choice can affect pull and smoke under load. Fitment still comes from the canister and old element.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
