The Massey Ferguson 4610 tractor primary air filter part number is 6259119M91. The inner safety filter is 7068314M1.
Massey Ferguson 4610 Air Filter Details
Primary air filter part number
6259119M91
Inner safety air filter part number
7068314M1
Outer air filter part number
7068069M1
Air Filter Service Interval Guide
Air Filter Service Interval Guide
Dusty use
100 hrs
Average
300 hrs
Light use
600 hrs
These are practical inspection/replacement guide ranges for the utility tractor category. Dusty work can shorten the interval heavily, so use the restriction indicator and operator manual first.
Massey Ferguson 4610 Extra Air Filter Notes
Engine displacement
3.3 L | 201.4 cu in
Engine horsepower
99 hp | 74 kW
Primary filter note
For the Massey Ferguson 4610, the listed primary air filter part number is 6259119M91. Match the number before buying because air cleaner setups can vary by engine, serial range and market.
Outer filter note
The listed outer air filter part number is 7068069M1.
Safety filter note
The listed inner safety air filter is 7068314M1. Do not remove the safety element for normal cleaning; replace it if dirty, damaged or oil-soaked.
Fitment note
Check the old filter, air cleaner housing label and parts book before ordering if the tractor has had an engine or intake-housing change.
Power range note
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
Engine airflow note
If a cross-reference is for a different displacement family, verify it hard before buying. Similar model names can hide different intake setups.
Service note
Clean loose dust from the air cleaner housing before pulling the filter. Never run the tractor with the filter removed, even for a quick test.
Massey Ferguson 4610 Air Filter FAQs
Which Massey Ferguson 4610 air-filter parts should be changed together?
For a full parts check, separate the service element from the safety element: buy the outer/primary service element first, then buy the inner safety element only if it is dirty, damaged or due. Do not accidentally order 7068069M1 when you meant the safety filter, or 7068314M1 when you meant the outer filter.
What would make a Massey Ferguson 4610 air filter cross-listing suspicious?
Use 6259119M91 as the anchor number, then verify the old element and housing label. This is a Massey-style M-suffix number, and the setup looks like a primary, outer and inner safety element setup, so one loose search result is not enough.
How should I read the Massey Ferguson 4610 air-filter number?
When there are several part numbers, do not search them all in one cart and hope. Label each one as primary, outer or safety before buying.
Is the Massey Ferguson 4610 outer filter the same as the primary filter?
The presence of both outer and inner numbers means you should order carefully. A kit can be convenient, but only if it contains the correct service element and safety element.
Can the Massey Ferguson 4610 lose power from a dirty air filter?
At this power level, a dirty filter can show up as weaker pull, smoke or higher heat under load. Use job conditions and the restriction indicator ahead of a fixed schedule.
When should the Massey Ferguson 4610 safety element be replaced?
The inner element is there for the mistake moment: a torn outer filter, bad seal or dusty service. Keep it clean and seated while working around 6259119M91.
Why should I check the engine before ordering a Massey Ferguson 4610 air filter?
Engine family matters because intake housings are not always shared across every version of a model. Confirm the canister, not just the tractor name.
Official information note
Mistakes do happen. Air filter specs can change by year, engine, serial range, market and air cleaner housing. Check the old filter, operator manual, parts book and official masseyferguson.com website before ordering or installing an air filter.
