The Massey Ferguson 435 Xtra tractor cooling system capacity is 26.4 gal | 99.9 L, coolant type is 50/50 ethylene glycol-based coolant, and coolant change interval is every 500 hours.
Massey Ferguson 435 Xtra Coolant Capacity Details
| Cooling system capacity | 26.4 gal | 99.9 L |
|---|---|
| Coolant type | 50/50 ethylene glycol-based coolant |
| Coolant change interval | Every 500 hours |
| Coolant mixture ratio | 50/50 antifreeze and water |
| Radiator cap pressure | 15 psi | 103 kPa |
Coolant Capacity Comparison Chart
Coolant Capacity Comparison
Benchmarks use practical low, average and high coolant-capacity ranges for the utility tractor category. Use the exact tractor manual before buying coolant.
Massey Ferguson 435 Xtra Extra Coolant Notes
| Engine horsepower | 72 hp | 53.7 kW |
|---|---|
| Engine displacement | 3.1 L | 192 cu in |
| Capacity note | For the Massey Ferguson 435 Xtra, the listed cooling system capacity is 26.4 gal | 99.9 L. Buy slightly more coolant than the exact capacity so you have enough for topping off after air burps out. |
| Mixture note | 50/50 antifreeze and water. |
| Radiator cap note | The radiator cap pressure listed for the Massey Ferguson 435 Xtra is 15 psi | 103 kPa. Do not replace it with a random cap unless the pressure rating matches. |
| Refill note | Refill slowly, run the tractor until warm with the heater circuit open if fitted, let it cool, then recheck the coolant level. Never remove a hot radiator cap under pressure. |
Massey Ferguson 435 Xtra Coolant FAQs
How much coolant does a Massey Ferguson 435 Xtra take?
The Massey Ferguson 435 Xtra takes 26.4 gal | 99.9 L of coolant. That is well above the normal utility tractor benchmark shown here, so treat it as a full cooling-system service job, not a quick top-up.
Is 26.4 gal | 99.9 L a lot of coolant for a Massey Ferguson 435 Xtra?
Yes. For this tractor category, 26.4 gal | 99.9 L is well above normal. This is the sort of refill where you want all coolant on hand before draining, because stopping halfway through the job is annoying and messy.
How many coolant jugs do I need for a Massey Ferguson 435 Xtra?
Do not underestimate this refill. A 26.4 gal | 99.9 L system needs about 27 one-gallon containers if you are using premixed coolant. If using concentrate at a 50/50 mix, plan on about 13.2 gal of concentrate and 13.2 gal of distilled water. In metric terms, that is roughly 20 x 5 L containers for a full premix refill.
What coolant should I use in a Massey Ferguson 435 Xtra?
The listed coolant is 50/50 ethylene glycol-based coolant. Ethylene glycol tells you the base coolant, but the additive package still matters on diesel engines, so match the manual or an approved equivalent. The listed mix is 50/50 antifreeze and water, so do not run straight water except as a short emergency move.
How much concentrate and water does a Massey Ferguson 435 Xtra need?
With the listed 50/50 antifreeze and water mix, a full 26.4 gal | 99.9 L refill works out to about 13.2 gal of antifreeze concentrate and 13.2 gal of distilled water. If using premix, do not add extra water unless the product label says to.
Can I use a different radiator cap on a Massey Ferguson 435 Xtra?
The listed cap pressure is 15 psi | 103 kPa. That higher-pressure cap helps raise the boiling point, but only if the radiator neck, hoses and overflow path are in good shape. A weak cap or damaged seat can still cause coolant loss.
Mistakes do happen. Coolant specs can change by year, engine, market, radiator option and coolant chemistry. Check the operator manual, parts book and official masseyferguson.com website before draining, flushing or refilling the cooling system.
