Weight summary
The published Massey Ferguson 4225 weight is 6,114–10,000 lb (2,773–4,536 kg). The primary figure used for comparisons is 7,630 lb (3,460 kg), listed as Operating. The published configurations span 3,886 lb, a 63.6% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Massey Ferguson |
|---|---|
| Model | 4225 |
| Category | Farm tractor |
| Model years | 1997 – 2001 |
| Tractor type | Utility Tractor |
| Published weight variants | 6 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | 2WD ROPS | 6,114 lb | 2,773 kg | 3.06 | — |
| Weight | 2WD Cab | 6,935 lb | 3,145 kg | 3.47 | — |
| Weight | 4WD ROPS | 6,665 lb | 3,023 kg | 3.33 | — |
| Weight | 4WD Cab | 7,487 lb | 3,396 kg | 3.74 | — |
| Operating | — | 7,630 lb | 3,460 kg | 3.81 | — |
| Max rear axle | — | 10,000 lb | 4,536 kg | 5 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Massey Ferguson 4325 (7630 lb)
- J.I. Case 610 (7625 lb)
- New Holland TS6020 (7617 lb)
- Allis Chalmers HD3 (7645 lb)
- John Deere 3410 (7650 lb)
Closest comparable tractors
- New Holland TL70 (7660 lb, 65 hp)
- Case IH C60 (7605 lb, 64 hp)
- Massey Ferguson 4325 (7630 lb, 67 hp)
- John Deere 1641 (7409 lb)
- John Deere 3210 (7340 lb, 65 hp)
Massey Ferguson 4225 weight FAQ
How much does a Massey Ferguson 4225 weigh?
The Massey Ferguson 4225 weighs 7,630 lb (3,460 kg) using the published Operating figure. Across the published configurations on this page, weight ranges from 6,114 to 10,000 lb (2,773 to 4,536 kg).
How much heavier is the 4WD Massey Ferguson 4225 than the 2WD model?
Published 2WD weight is 6,114–6,935 lb (2,773–3,146 kg), while published 4WD weight is 6,665–7,487 lb (3,023–3,396 kg). On a midpoint basis, the published 4WD configurations are about 552 lb heavier. Tires, transmission and other configuration differences can also affect the number.
What is the operating weight of the Massey Ferguson 4225?
The published operating weight is 7,630 lb (3,461 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
Is the Massey Ferguson 4225 a heavy utility tractor?
Yes. The representative figure sits at about the 78th percentile, heavier than roughly 78% of the utility tractor peers. That puts it in the heavy range for this comparison. It is 2,367 lb heavier than the peer-group average of 5,263 lb.
How wide is the Massey Ferguson 4225 for transport?
The maximum published tractor width is 77 in (6.4 ft). That is 25 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
Does the Massey Ferguson 4225 weigh more than 10,000 lb?
Some configurations do. The representative published weight is 7,630 lb, and the heaviest published configuration on this page is 10,000 lb (5 US tons). Any trailer calculation also needs the trailer itself plus fuel, ballast, attachments and other equipment.
