Massey Ferguson 374S Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 374S Horsepower Comparison Charts
PTO horsepower comparison
This model
57 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
236 ci
Average
260 ci
Low
150 ci
High
380 ci
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
4.1 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 374S Horsepower FAQ
How much PTO horsepower does the Massey Ferguson 374S have?
The listed PTO output is 57 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 57 hp rather than using a bigger engine-horsepower number.
How big is the Massey Ferguson 374S engine?
The engine displacement is 236 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 374S engine stressed for its PTO horsepower?
The engine has about 4.1 cubic inches per PTO hp, using 236 ci and 57 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 374S make?
The output density is about 14.6 PTO hp per liter, using 57 PTO hp and 3.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 374S rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
