The Massey Ferguson 3660 tractor hydraulic capacity is 19.8 gal | 74.9 L, pump flow is 5.5 gpm (low-pressure element) | 20.8 lpm, and hydraulic pressure is 240 psi (low-pressure element) | 16.5 bar.
about 0.8 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
74.9 L capacity with 5.5 gpm pump flow
Massey Ferguson 3660 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
19.8 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
5.5 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
240 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
11,285 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 3660 hydraulic capacity big or small for its size?
The Massey Ferguson 3660 lists 19.8 gal | 74.9 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Massey Ferguson 3660 hydraulics feel fast or slow?
The useful speed clue is 5.5 gpm (low-pressure element) | 20.8 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 3660 hydraulic pressure tell you?
The pressure spec is 240 psi (low-pressure element) | 16.5 bar, below the 2,600 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the Massey Ferguson 3660?
On the Massey Ferguson 3660, 5.5 gpm (low-pressure element) | 20.8 lpm pump flow points to slower loader and cylinder movement, 240 psi pressure affects force more than speed, and 11,285 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3660?
For implement matching, the useful checks are 5.5 gpm flow, 240 psi pressure, 11,285 lb listed lift, and 2 or 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, not a brute-force hydraulic setup compared with higher-pressure systems, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3660 rear lift capacity strong?
The listed lift figure is 11285 lbs | 5118 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 3660 hydraulic remotes enough?
The Massey Ferguson 3660 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 3660 hydraulics handle long hydraulic jobs?
The useful heat clues are 19.8 gal of hydraulic capacity, 5.5 gpm flow, 240 psi pressure, and about 0.8 hydraulic hp by the pressure-flow estimate. That is a relaxed flow-to-oil-volume ratio, so the system is not working the oil volume as hard on paper.
How much hydraulic power does the Massey Ferguson 3660 make on paper?
Using 240 psi and 5.5 gpm, the rough pressure-flow estimate is about 0.8 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3660 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position and electronic draft control, and listed lift is 11285 lbs | 5118 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
